System Configuration lu

System Configuration

for lu, jue jul 3 23:38:05 CEST 2008

Hardware and Device Information

Operating System Information

Filesystem Information

Network Information

User and Login Information

Security Information


Hardware and Device Information

# cat /proc/cpuinfo

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 14
model name	: Genuine Intel(R) CPU           T2400  @ 1.83GHz
stepping	: 8
cpu MHz		: 1000.000
cache size	: 2048 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 2
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc pni monitor vmx est tm2 xtpr
bogomips	: 3663.84
clflush size	: 64

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 14
model name	: Genuine Intel(R) CPU           T2400  @ 1.83GHz
stepping	: 8
cpu MHz		: 1000.000
cache size	: 2048 KB
physical id	: 0
siblings	: 2
core id		: 1
cpu cores	: 2
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc pni monitor vmx est tm2 xtpr
bogomips	: 3659.14
clflush size	: 64

# free -m

             total       used       free     shared    buffers     cached
Mem:          2018        610       1407          0         84        214
-/+ buffers/cache:        311       1707
Swap:         1906          0       1906

# lspci

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
---

# hostid

007f0101

# dmesg | cut -c-80

Linux version 2.6.22-2-686 (Debian 2.6.22-4) (waldi@debian.org) (gcc version 4.1
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
 BIOS-e820: 000000007f690000 - 000000007f697000 (ACPI data)
 BIOS-e820: 000000007f697000 - 000000007f700000 (ACPI NVS)
 BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1142MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7890
Entering add_active_range(0, 0, 521872) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   521872
early_node_map[1] active PFN ranges
    0:        0 ->   521872
On node 0 totalpages: 521872
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2285 pages used for memmap
  HighMem zone: 290211 pages, LIFO batch:31
DMI present.
ACPI: RSDP 000F7750, 0014 (r0 PTLTD )
---

ACPI: RSDT 7F690953, 003C (r1 FUJ___ DW1_____ 20060308  LTP        0)
ACPI: FACP 7F696E20, 0074 (r1 FUJ___ DW1_____ 20060308 LOHR       5A)
ACPI: DSDT 7F691325, 5AFB (r1 FUJ___ DW1_____ 20060308 MSFT  100000E)
ACPI: FACS 7F697FC0, 0040
ACPI: APIC 7F696E94, 0068 (r1 FUJ___ DW1_____ 20060308 LOHR       5A)
ACPI: BOOT 7F696FD8, 0028 (r1 FUJ___ DW1_____ 20060308  LTP        1)
ACPI: MCFG 7F696F34, 003C (r1 FUJ___ DW1_____ 20060308 LOHR       5A)
ACPI: APIC 7F696F70, 0068 (r1 FUJ___ DW1_____ 20060308  LTP        0)
ACPI: SSDT 7F69098F, 0500 (r1  PmRef    CpuPm     3000 INTL 20050228)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists.  Total pages: 517795
Kernel command line: root=/dev/sda2 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1829.662 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2060848k/2087488k available (1688k kernel code, 25456k reserved, 653k da
virtual kernel memory layout:
    fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc034f000 - 0xc038c000   ( 244 kB)
      .data : 0xc02a62bf - 0xc03497e4   ( 653 kB)
      .text : 0xc0100000 - 0xc02a62bf   (1688 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3663.84 BogoMIPS (lpj=7327690)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 0000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3659.14 BogoMIPS (lpj=7318290)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 0000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
Total of 2 processors activated (7322.99 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=47
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Firmware left 0000:05:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-2fff
  MEM window: da000000-dbffffff
  PREFETCH window: d4000000-d5ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 3000-3fff
  MEM window: d6000000-d7ffffff
  PREFETCH window: d0000000-d1ffffff
PCI: Bridge: 0000:00:1c.2
  IO window: 4000-4fff
  MEM window: d8000000-d9ffffff
  PREFETCH window: d2000000-d3ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 5000-5fff
  MEM window: dc000000-dc0fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Freeing initrd memory: 5288k freed
Simple Boot Flag value 0x82 read from CMOS RAM was invalid
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1215122588.020:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2F] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 244k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: SSDT 7F6910F0, 01A8 (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
ACPI: SSDT 7F690E8F, 01DC (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7F691298, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
ACPI: SSDT 7F69106B, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050228)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to: possible TSC halt in C2.
ACPI: Thermal Zone [TZ00] (40 C)
Time: acpi_pm clocksource has been installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
SCSI subsystem initialized
libata version 2.21 loaded.
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
PCI: Enabling device 0000:05:09.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 20 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:05:09.0 to 64
firewire_ohci: Added fw-ohci device 0000:05:09.0, OHCI version 1.0
ahci 0000:00:1f.2: version 2.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
Clocksource tsc unstable (delta = -270389938 ns)
firewire_core: created new fw device fw0 (0 config rom retries)
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xf8840500 ctl 0x00000000 bmdma 0x00000000 irq 220
ata2: SATA max UDMA/133 cmd 0xf8840580 ctl 0x00000000 bmdma 0x00000000 irq 220
ata3: SATA max UDMA/133 cmd 0xf8840600 ctl 0x00000000 bmdma 0x00000000 irq 220
ata4: SATA max UDMA/133 cmd 0xf8840680 ctl 0x00000000 bmdma 0x00000000 irq 220
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: FUJITSU MHV2080BH, 00000025, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
hub 5-0:1.0: connect-debounce failed, port 6 disabled
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080B 0000 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:05:08.0 to 64
e100: eth0: e100_probe: addr 0xdc000000, irq 21, MAC addr 00:16:36:3B:73:36
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
hda: PHILIPS DVD+/-RW SDVD8820, ATAPI CD/DVD-ROM drive
hub 5-0:1.0: connect-debounce failed, port 6 disabled
hda: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
hub 5-0:1.0: connect-debounce failed, port 6 disabled
hub 5-0:1.0: connect-debounce failed, port 6 disabled
hub 5-0:1.0: connect-debounce failed, port 6 disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
hub 5-0:1.0: connect-debounce failed, port 6 disabled
hub 5-0:1.0: connect-debounce failed, port 6 disabled
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
Real Time Clock Driver v1.12ac
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2dm
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
input: SynPS/2 Synaptics TouchPad as /class/input/input1
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rng: FWH not detected
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20
sdhci: SDHCI controller found at 0000:05:09.1 [1180:0822] (rev 19)
PCI: Enabling device 0000:05:09.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:05:09.1[B] -> GSI 21 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:05:09.1 to 64
mmc0: SDHCI at 0xdc001800 irq 22 DMA
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hub 5-0:1.0: connect-debounce failed, port 6 disabled
hda_intel: azx_get_response timeout, switching to polling mode...
Adding 1951856k swap on /dev/sda5.  Priority:-1 extents:1 across:1951856k
hub 5-0:1.0: connect-debounce failed, port 6 disabled
EXT3 FS on sda2, internal journal
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hub 5-0:1.0: connect-debounce failed, port 6 disabled
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
udev: renamed network interface eth1 to eth2
hub 5-0:1.0: connect-debounce failed, port 6 disabled
hub 5-0:1.0: connect-debounce failed, port 6 disabled
hub 5-0:1.0: connect-debounce failed, port 6 disabled
hub 5-0:1.0: connect-debounce failed, port 6 disabled
hub 5-0:1.0: connect-debounce failed, port 6 disabled
ieee80211_crypt: registered algorithm 'CCMP'
printk: 2 messages suppressed.
hub 5-0:1.0: connect-debounce failed, port 6 disabled
printk: 2 messages suppressed.
hub 5-0:1.0: connect-debounce failed, port 6 disabled
printk: 1 messages suppressed.
hub 5-0:1.0: connect-debounce failed, port 6 disabled
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID]
apm: BIOS not found.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
printk: 2 messages suppressed.
hub 5-0:1.0: connect-debounce failed, port 6 disabled
printk: 1 messages suppressed.
hub 5-0:1.0: connect-debounce failed, port 6 disabled
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
printk: 2 messages suppressed.
hub 5-0:1.0: connect-debounce failed, port 6 disabled
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[drm] Initialized i915 1.6.0 20060119 on minor 0
printk: 2 messages suppressed.
hub 5-0:1.0: connect-debounce failed, port 6 disabled
eth2: no IPv6 routers present
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb

Operating System Information

# uname -a

Linux lu 2.6.22-2-686 #1 SMP Fri Aug 31 00:24:01 UTC 2007 i686 GNU/Linux

# uptime

 23:38:05 up  1:34,  1 user,  load average: 0.26, 0.19, 0.16

# dpkg -l

Desired=Unknown/Install/Remove/Purge/Hold
| Estado=No/Instalado/Config-files/Unpacked/Failed-config/Half-installed
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: mayúsc.=malo)
||/ Nombre                               Versión                    Descripción
+++-====================================-==========================-============================================
ii  acpi                                 0.09-4                     displays information on ACPI devices
ii  acpid                                1.0.6-5.1                  Utilities for using ACPI power management
---

# cat /etc/modules

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
vboxdrv
sbp2

# who -r

         `run-level' 2 2008-07-03 22:03                   último=S

# ls /etc/*elease; cat /etc/*elease


# ls /etc/*ersion; cat /etc/*ersion

/etc/debian_version
lenny/sid

# cat /etc/sysctl.conf


# ps -ef


UID        PID  PPID  C STIME TTY          TIME CMD
root         1     0  0 22:03 ?        00:00:01 init [2]
---

# cat /etc/issue.net

Debian GNU/Linux lenny/sid

# cat /var/sadm/install_data/Solaris*log | grep “^\*\*\* Install”



Filesystem Information

# df -k

S.ficheros         Bloques de 1K   Usado    Dispon Uso% Montado en
/dev/sda2             19228308   8925572   9325984  49% /
tmpfs                  1033588         4   1033584   1% /lib/init/rw
udev                     10240        76     10164   1% /dev
tmpfs                  1033588         0   1033588   0% /dev/shm
/dev/sda3               225838     63166    150624  30% /boot
/dev/sda6             17077652    176420  16033724   2% /var/mirror

# cat /etc/fstab

# /etc/fstab: static file system information.
#
#
proc            /proc           proc    defaults        0       0
/dev/sda2       /               ext3    defaults,errors=remount-ro 0       1
/dev/sda3       /boot           ext3    defaults        0       2
/dev/sda5       none            swap    sw              0       0
/dev/sda6       /var/mirror            ext3    defaults           0       0
/dev/hda        /media/cdrom0   udf,iso9660 user,noauto     0       0

# mount

/dev/sda2 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
procbususb on /proc/bus/usb type usbfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/sda3 on /boot type ext3 (rw)
/dev/sda6 on /var/mirror type ext3 (rw)

Network Information

# cat /etc/hosts

127.0.0.1	localhost

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

# cat /etc/resolv.conf

nameserver 192.168.1.1

# netstat -nr

Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.1.0     0.0.0.0         255.255.255.0   U         0 0          0 eth2
0.0.0.0         192.168.1.1     0.0.0.0         UG        0 0          0 eth2

# netstat -na

Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 0.0.0.0:33157           0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:113             0.0.0.0:*               LISTEN
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN

# netstat -ni

Kernel Interface table
Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg
eth2       1500 0     41923      3   5576 0         37546      0      0      0 BMRU
lo        16436 0       961      0      0 0           961      0      0      0 LRU

# cat /etc/hostname

lu

# cat /etc/network/interfaces


# cat /etc/*inetd.conf

# /etc/inetd.conf:  see inetd(8) for further informations.
#
# Internet server configuration database
#
#
# Lines starting with "#:LABEL:" or "##" should not
# be changed unless you know what you are doing!
#
# If you want to disable an entry so it isn't touched during
# package updates just comment it out with a single '#' character.
#
# Packages should modify this file by using update-inetd(8)
#
#
#
#:INTERNAL: Internal services
#echo		stream	tcp	nowait	root	internal
#echo		dgram	udp	wait	root	internal
#chargen	stream	tcp	nowait	root	internal
#chargen	dgram	udp	wait	root	internal
#discard	stream	tcp	nowait	root	internal
#discard	dgram	udp	wait	root	internal
#daytime	stream	tcp	nowait	root	internal
#daytime	dgram	udp	wait	root	internal
#time		stream	tcp	nowait	root	internal
#time		dgram	udp	wait	root	internal
---

# env


# crontab -l


# last -n 8

jcasa    :0                            Thu Jul  3 22:04   still logged in
reboot   system boot  2.6.22-2-686     Thu Jul  3 22:03 - 23:38  (01:34)

wtmp begins Thu Jul  3 18:48:56 2008

# lastlog | grep -v “Never logged in”



Security Information

Anuncios

Responder

Introduce tus datos o haz clic en un icono para iniciar sesión:

Logo de WordPress.com

Estás comentando usando tu cuenta de WordPress.com. Cerrar sesión / Cambiar )

Imagen de Twitter

Estás comentando usando tu cuenta de Twitter. Cerrar sesión / Cambiar )

Foto de Facebook

Estás comentando usando tu cuenta de Facebook. Cerrar sesión / Cambiar )

Google+ photo

Estás comentando usando tu cuenta de Google+. Cerrar sesión / Cambiar )

Conectando a %s